FINISHING TANK HEATERS
 
  • Lightest per KW of any heater on the market
  • Lowest watt density rating to reduce build-up and prolong heater life.
  • Electropolish available to reduce corrosion.
  • 239 F preset over-temperature sensor standard.
  • Moisture resistant junction box fully welded.
  • 1" stand-off leg standard.
  • Customizing available.
  • Short lead times.
  • Permanently mounted tag allowing easy identification.
  • Sheath materials available: SA=304 Stainless Steel, SB=316 Stainless Steel, N-Incoloy®, T-Titanium.
  • Most heaters CSA® and UL® recognized.

WARNING: The surface temperature of electric immersion heaters can exceed 1400° F (760°C) when the heated section is exposed to air. This creates a severe fire hazard when used in many plastic tanks. Over-temperature sensors and separate liquid level controls must be used with all installations. Solution should be kept 2” above the heated portion at all times.

OVER THE SIDE STYLE
BOTTOM TANK STYLE
HOME | PRODUCTS | TECHNICAL | COMPANY | WARRANTY | HEATER HINTS | CONTACT